24-Hour Mode
Motion detection remains active during both daytime and nighttime.

The GIF is displayed at a controlled width to avoid soft, stretched playback.
When motion is detected, this outdoor alarm can trigger a powerful siren and bright flashing lights to help discourage unwanted wildlife and alert you to activity around your property.
Designed for outdoor locations where animals or unexpected movement may become a problem, the unit combines infrared detection with adjustable sound and a bright visual warning.
The PIR sensor monitors the selected area. When movement enters the detection zone, the alarm responds with your chosen sound setting and flashing red lights.
Choose mute, low, medium or high volume to suit the installation area. The loudest setting is designed for open outdoor spaces where a strong warning is needed.
The infrared sensor is designed for a horizontal detection angle of approximately 120° and a detection distance of about 16.4–26.2 ft, depending on placement and conditions.
Switch the operating mode to match the location, traffic level and time of day.
Motion detection remains active during both daytime and nighttime.
The device responds to motion after dark to reduce daytime activation.
Select from ten preset warning sounds or record your own message for approximately 20 seconds. Use a single sound or cycle through different sounds to vary the response.
The top solar panel helps recharge the built-in 2000mAh battery during outdoor use. A USB charging port provides a convenient backup during long cloudy periods or before installation.
Mount the unit near the area you want to monitor and direct the PIR sensor toward likely approach paths.
Use USB charging before first installation for dependable initial operation.
Choose a clear approach path with sunlight reaching the solar panel.
Attach the device to a wall, fence, tree or post at a suitable height.
Select the mode, sound and volume, then walk through the detection area.
Face the approach path. Aim the sensor where animals or people are most likely to enter.
Avoid moving branches. Nearby leaves, flags or heat sources may increase unwanted activation.
Change the sound occasionally. Varying the warning may help reduce animal habituation.
Keep the panel exposed. Position the solar surface where it can receive direct daylight.
Yes. Use 24-hour mode for continuous detection or night-only mode for activation after dark.
Yes. The device supports a custom recording of approximately 20 seconds in addition to ten built-in sounds.
The built-in battery stores power, and USB charging can be used when available sunlight is limited.
The maximum output is very loud. Install it away from ears, occupied seating areas and animal resting spaces, then select an appropriate volume.
No deterrent can guarantee identical results in every location. Performance depends on placement, settings, animal behavior and surrounding conditions.
Flexible settings, powerful sound, bright strobe lights and dual charging in one weather-resistant unit.