Multiple protection functions
Built-in monitoring is presented to help reduce common connection and charging risks.

Emergency starting power for the road
Keep a compact emergency power solution in the trunk for weak batteries, roadside lighting and USB-powered devices. The digital display and smart clamp system make status and connection checks easier to understand.
Fast top-up support
The product imagery shows USB-C Power Delivery input and output support. A higher-output compatible charger can reduce recharge time and help restore enough stored energy for emergency use more quickly.
One high-output port supports both recharging the unit and powering compatible devices.
The front display helps you check remaining charge, voltage and operating status.
The compact housing and storage bag help keep the cables organized between trips.
Protection-focused design
The page highlights reverse-polarity, spark, overvoltage, short-circuit, overcurrent, overheat and low-voltage protection functions.
Built-in monitoring is presented to help reduce common connection and charging risks.
A large front screen and mode button make battery status and selected functions easier to read.
Red and black clamps help identify polarity, while the system is presented with reverse-polarity protection.
More than an emergency starter
The product imagery presents one USB-C port with up to 60W input/output support plus USB-A output for everyday electronics. Device compatibility depends on the cable and charging protocol used.
Light when you need it
A built-in LED light can illuminate a battery compartment, roadside repair area or dark campsite. The product image lists several brightness and signal settings, including SOS, blink and strobe modes.
Use steady illumination for battery checks and low-light roadside tasks.
SOS, blink and strobe settings can help attract attention when visibility is poor.
Select a lower or higher output depending on the situation and remaining battery.
General jump-start sequence
Follow the included instructions and the vehicle manual. The steps below are a general safety sequence and do not replace the product manual.
Switch off the vehicle, accessories and lights. Confirm that the vehicle uses a compatible 12V battery system.
Attach red to the positive terminal and black to the correct negative or chassis point specified by the vehicle manual.
Confirm that no warning indicator is shown before attempting to start the engine.
Crank only as directed, then remove the clamps in the reverse order after the engine starts.
Choose before checkout
The product page currently lists four regional plug options. Select the plug that matches the wall outlets used in your destination country.
Use only with the battery voltage and vehicle types stated in the included instructions. Never use on a swollen, leaking, frozen or physically damaged battery. Keep sparks, flames and cigarettes away from batteries, work in a ventilated area, and do not allow the clamps to touch each other.
Frequently asked questions
No. Vehicle compatibility depends on engine size, battery condition, temperature, system voltage and the exact output of the selected product. Compare the product manual with your vehicle requirements before use.
Store it within the temperature range stated in the manual. Extreme heat or freezing temperatures can reduce lithium battery performance and service life. Recharge and inspect it regularly.
The page shows USB-C output up to 60W. Laptop charging requires a compatible USB-C Power Delivery profile and cable, and some high-power laptops may need more than 60W.
The current product imagery shows the main power unit, integrated battery clamps, a storage bag, charging cables and an instruction card. Review the selected variant and checkout details for the final package contents.
Check the displayed battery level regularly and recharge after use. For long-term storage, follow the maintenance interval and storage instructions in the included manual.
Prepare before the battery goes flat
Select the correct regional plug, confirm vehicle compatibility and store the charged unit with its cables where you can reach it quickly.